Why is my MacDon M Series Farm Equipment engine knocking?
If your MacDon Farm Equipment engine is knocking, it could be due to insufficient oil (add oil), low or high coolant temperature (remove and check the thermostat), or using improper fuel (use proper fuel).
What to do if there is low oil pressure in MacDon M Series Farm Equipment?
If you're experiencing low oil pressure in your MacDon Farm Equipment, the issue could be due to a low oil level (add oil) or using an improper type of oil (drain and fill the crankcase with the proper oil).
Why is my MacDon M Series Farm Equipment experiencing high oil consumption?
High oil consumption in your MacDon Farm Equipment can be attributed to using crankcase oil that is too light (use the recommended oil) or oil leaks (check for leaks around gaskets, seals, and drain plugs).
General| Header Type | Draper |
|---|---|
| Working Width | 30, 35, 40, 45 ft |
| Crop Compatibility | Various crops including cereals, oilseeds, and specialty crops |
| Cutting Width | 30, 35, 40, 45 ft (same as working width) |
| Engine Power | Not applicable (header only) |
| Grain Tank Capacity | Not applicable (header only) |
| Unloading Rate | Not applicable (header only) |
| Fuel Capacity | Not applicable (header only) |
To Next Page
