To Next PageTo Next Page
Need help?Do you have a question about the Mackie 802-VLZ3 and is the answer not in the manual?
General| Type | Analog |
|---|---|
| Channels | 8 |
| Line Inputs | 8 |
| EQ Bands | 3-band |
| Phantom Power | Yes |
| Height | 3.5 inches |
| USB Interface | No |
| Other Inputs | 2 (stereo) |
| Main Outputs | 2 |
| Other Outputs | 2 |
| Headphone Output | Yes |
| Aux Sends | 2 (1 pre-fader, 1 post-fader) |
Details FCC rules for digital devices and interference.
Discusses digital apparatus radio noise emissions compliance for Canada.
Warns about high noise levels and potential hearing loss, providing OSHA guidelines.
An important introductory note advising users to read this specific page.
Step-by-step guide for setting optimal input levels for low noise and high headroom.
Quick steps to set up and start mixing with a microphone and keyboard.
Introduces the 802-VLZ3 mixer and lists its key features.
Information about the included Tracktion 3 music production software.
Illustrates connecting components for a live band PA system.
Diagram and explanation for a home studio recording setup.
Shows synths connected as a keyboard submixer for stage monitors.
Illustrates mixer connections for video editing and production workflows.
Shows mixer configuration for shared home studio and theater use.
Details XLR mic inputs, phantom power, and related precautions.
Describes balanced/unbalanced line inputs for channels 1-2.
Details stereo line inputs, jack normalling, and mono/stereo operation.
Explains insert jacks for serial effects processing and direct outs.
Describes Aux Send outputs for monitors/effects and Stereo Return inputs.
Describes the ALT 3-4 stereo bus outputs for routing flexibility.
Details the control room outputs for monitoring.
Explains the headphone output and safety precautions.
Details the RCA tape inputs for audio playback.
Details the 1/4" and XLR main outputs for amplifiers or speakers.
Details AC adapter connection and the main power switch.
Explains level, solo, mute, and Alt 3-4 routing features.
Details pan control and the 3-band EQ section for tonal shaping.
Explains the function of the aux send knobs for each channel.
Controls main output level, monitor source selection, and levels.
Details the Phones and Control Room/Submix level knobs.
Explains assigning mixes, solo functions, and the solo indicator light.
Details the LED meters and the Aux Master Send control.
Explains the pre/post aux switch and the Stereo Return level control.
Provides steps for diagnosing channel and output problems.
Covers power checks, warranty service, and technical support contacts.
Explains pinouts and applications for XLR, TRS, and TS connectors.
Details insert jack functionality and stereo input/return configurations.
Describes RCA connectors and microphone stand adapter mounting.
Lists key technical specs like noise, levels, impedances, and distortion.
Details frequency response, EQ points, dimensions, and weight.
Illustrates the internal signal paths and processing stages of the mixer.
Outlines the terms, conditions, and duration of the product warranty.
