Need help?Do you have a question about the Mackie Onyx 1640 and is the answer not in the manual?
General| Channels | 16 |
|---|---|
| Subgroups | 4 |
| Talkback | Yes |
| Faders | 60mm |
| Headphone Outputs | 1 |
| Aux Sends | 6 |
| FireWire Option | Yes (optional FireWire card) |
| Type | Analog |
| Phantom Power | Yes |
| USB Interface | No |
| FireWire Interface | Yes (via optional FireWire card) |
| Buses | 4 |
Lists the mixer's primary use cases for studio and live sound reinforcement.
Highlights the mixer's main functionalities: 16-channel, 4-buss, 4-band EQ, DI inputs, FireWire option.
States the cost of the Mackie Onyx 1640 mixer as $1,649.
Provides Mackie's contact details, including phone number and website.
Details input sensitivity levels for various inputs at different gain settings.
Specifies the output level at the onset of clipping for main outputs.
Lists the signal polarity for different input and output types.
Provides the input impedance values for various connection types.
Lists the output impedance for main stereo, tape, and aux outputs.
Measures adjacent channel separation across different frequencies.
Details gain levels for mic, line, and insert inputs at minimum and maximum.
Specifies input overload levels for mic, line, and instrument inputs.
States headphone output power at the onset of clipping.
Graphs and describes the frequency response of mic inputs to main outputs.
Presents THD+N measurements for input levels and gain settings.
Lists the audio equipment used for the mixer review.
To Next Page
