Need help?Do you have a question about the Mackie Onyx 1620i and is the answer not in the manual?
General| Brand | Mackie |
|---|---|
| Model | Onyx 1620i |
| Category | Music Mixer |
| Language | English |
Basic setup, environment, and initial control settings.
How to connect audio sources and set optimal input/output levels.
Initial FireWire setup and general operational tips for the mixer.
Overview of the mixer's capabilities and premium features.
Detailed list of the Onyx 1620i's specifications and functionalities.
Illustrates a common setup for live club sound reinforcement.
Shows a typical setup for studio recording with the mixer.
Depicts a setup for post-production audio workflows.
Details on connecting power and operating the main power switch.
Information on utilizing the FireWire interface for digital audio transfer.
Explains the female XLR mic inputs and phantom power.
Details on connecting line-level sources to mono and stereo channels.
Information on main stereo outputs and the alternate 3-4 bus.
How to use the RCA tape inputs and outputs for recording.
Details on connecting and using headphones with the mixer.
Describes controls for channels 1-8, including EQ and Hi-Z.
Details controls for channels 9-16, including EQ and FireWire input selection.
Explains the 4-band EQ on mono and 3-band EQ on stereo channels.
Covers aux send levels, panning, and the mute/alt 3-4 function.
Details channel faders, OL/ -20 LEDs, and the solo function.
How to select main mix, tape, FW, or alt 3-4 for control room/phones.
Adjusting volume levels for control room and headphone outputs.
Understanding the function and interpretation of the mixer's meters.
How PFL and AFL solo modes work for channel monitoring.
Overall control of aux send levels and aux return inputs.
How to set aux sends for pre-fader or post-fader operation.
Location and level control for the built-in talkback microphone.
Routing talkback audio to headphones or aux sends.
Adjusting the overall stereo output level for the main mix.
Routing the main mix to computer via FireWire channels 15-16.
Guidance on diagnosing and resolving channel and output problems.
Checks for power issues and details on warranty and non-warranty repair services.
Explanation of pinouts and usage for XLR microphone connectors.
Description of TS and TRS 1/4" plugs for mono/stereo and balanced/unbalanced signals.
Information on using RCA connectors for audio devices.
How to use TRS insert jacks for send/receive signal paths.
Data on input noise, output noise, and signal distortion (THD+N).
Details on impedance values and maximum signal levels for various connections.
Physical size, weight, and power consumption of the mixer.
Steps and tools required to mount the mixer in a standard 19" rack.
Step-by-step guide for installing FireWire drivers on Windows.
Instructions for connecting and configuring the mixer with Mac OS X.
Details on modifying FireWire sends for pre/post insert or fader.
Information on modifying aux sends for pre-EQ operation.
To Next Page
