Mackie Monitor Series MSW8 User Manual

A P PLI C AT I O N S
Dual Load Reex SubwooferMONITOR Series
1
O F 4 PA G E S
MSW8
MSW8 SPEAKER
The Monitor MSW8 subwoofer was expressly
designed to complement the Monitor MR8. Alter-
nate satellite speakers, differing from the MR8 in
sensitivity and/or impedance, may be used with
the MSW8, by making use of a switch located on
the terminal plate. The switch bypasses the internal
crossover, allowing bi-amplication.
The MSW8 will handle 300W (IEC) continuous
power, producing 123dB SPL (1m) in a 35Hz–125Hz
bandpass.
Its 12" driver was exclusively created for
subwoofer applications, and features a reinforced
Kapton support for the 3" voice coil. All adhesives
used can withstand operating temperatures up to
300°C. The spider is airtight and acts as a pump to
air cool the magnet assembly. Additionally, a nned
heat sink is present on the back of the basket.
The rectangular cabinet utilizes a dual load
reex conguration to maximize the subwoofer's
performance while keeping its size to a minimum.
It is constructed with extremely rigid, high density
particle board to reduce cabinet resonance. Two
convenient hand holds are built-in. It is coated with
scratch resistant, matte black PVC with the excep-
tion of the attractively contoured bafe that is paint
coated to facilitate repainting.
The MSW8 is a part of Mackie Industrial’s
Monitor Series.
This Mackie Industrial product is covered by
an exclusive, one-time NO FAULT repair policy in
addition to a ve year, limited warranty.
Low-Frequency Enhancement
Music Enhancement
Special Effects Reinforcement
Entertainment Systems
Features
12" high efciency, sub-woofer driver
featuring 3" reinforced Kapton
®
voice coil,
nned heat sink and heat resistant adhesives
8Ω low inductance passive crossover
with band-limited output terminals for stereo
satellite loudspeakers
Extremely Efcient — Extremely Compact
Dual-load vented, rectangular enclosure,
constructed with high density particle board
for maximum rigidity
Exclusive Mackie Industrial — one-time NO
FAULT repair policy
Five year, limited warranty

Mackie Monitor Series MSW8 Specifications

General

Phase Switch	0 / 180 degrees
Woofer Size	8"
Frequency Response	38Hz - 150Hz
Input Connectors	XLR
Output Connectors	XLR
Type	Powered Subwoofer

Summary

MONITOR Series

MSW8 Dual Load Reflex Subwoofer

Overview of the Mackie MSW8 subwoofer, designed to complement the Monitor MR8 series.

Features

High-Efficiency Sub-Woofer Driver

Details the 12" driver with 3" voice coil, reinforced Kapton, heat sink, and adhesives.

Passive Crossover Network

Describes the 8-ohm low inductance crossover with band-limited output for stereo satellites.

Compact and Efficient Enclosure

Highlights the dual-load vented design, high-density particle board, and minimal size.

Mackie Industrial Warranty and Repair

Covers the exclusive one-time NO FAULT repair policy and a five-year limited warranty.

Applications

Low-Frequency Enhancement

Use for boosting bass frequencies in audio systems.

Music Enhancement

Application for improving the overall sound quality of music.

Special Effects Reinforcement

Use in applications requiring powerful low-frequency effects.

Entertainment Systems

Suitable for various entertainment setups needing robust bass.

Specifications

System Specifications

Details frequency range, response, sensitivity, SPL, impedance, and power ratings.

Transducer Details

Information on the low-frequency driver, including size and coil diameter.

Physical Characteristics

Covers enclosure type, rigging, color, input connectors, dimensions, and weight.

Architects' & Engineers' Specifications

System Components

Defines the system as driver, crossover network, and vented enclosure.

Low Frequency Transducer Requirements

Specifies the cone driver diameter, surround, voice coil, and impedance.

Enclosure Design and Construction

Details the vented design, material, finish, dimensions, and weight.

Performance Requirements

Outlines frequency response, sensitivity, SPL, and power handling.