Need help?Do you have a question about the Mackie mr5mk2 and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Housing material | - |
| Recommended usage | PC |
| Suitable for outdoor use | No |
| Tweeter | Yes |
| Number of drivers | 2 |
| Speaker enclosure | Closed |
| Speaker placement | Tabletop/bookshelf |
| Audio output channels | 1.0 channels |
| Number of tweeter drivers | 1 |
| Woofer diameter (imperial) | 5.25 \ |
| Tweeter diameter (imperial) | 1 \ |
| Impedance | - Ω |
| Frequency range | 50 - 20000 Hz |
| RMS rated power | 30 W |
| Peak Music Power Output (PMPO) | 55 W |
| Tweeter magnet type | Neodymium |
| Connector(s) | XLR, RCA, TRS |
| Connectivity technology | Wired |
| AC input voltage | 100 - 240 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 267 mm |
|---|---|
| Width | 197 mm |
| Height | 292 mm |
| Weight | 6500 g |
Information regarding exposure to high noise levels and potential permanent hearing loss.
Description of available input connectors (XLR, 1/4-inch, RCA) and wiring standards.
Details on the high-pass filter preventing low frequencies that could damage the woofer.
Explanation of the thermal switch that shuts down amplifiers when overheated.
Guide to diagnosing and resolving issues like no power, no sound, bad sound, and noise/hum/buzz.
Detailed technical specifications including acoustic performance, transducers, amplifiers, and dimensions.
To Next Page
