Do you have a question about the Mackie VLZ4 and is the answer not in the manual?
Series | VLZ4 |
---|---|
Type | Analog Mixer |
Mic Preamps | Onyx |
EQ Bands | 3-band |
Phantom Power | Yes |
Aux Sends | 2 |
Phantom Power Voltage | +48V |
USB | No |
Dimensions | Varies by model |
Weight | Varies by model |
Outputs | Main, Control Room, Headphone |
Channels | Varies by model |
Number of Channels | Varies by model |
Sweepable Mids | Yes (on some channels, depending on the specific model) |
Overview of the VLZ4 4 Bus mixer's main capabilities and design.
Guidance on navigating and understanding the manual's sections and icons.
Details on using the mixer's 4x2 USB interface for recording and playback.
Explanation of the mixer's dual FX engines and eight individual compressors.
Steps for preparing the mixer, setting controls, and making connections.
Procedure for adjusting gain and fader levels for optimal signal presence.
Details on XLR mic inputs, phantom power, and 1/4" line inputs.
Explanations for insert jacks, tape I/O, and main XLR/1/4" outputs.
Information on aux send outputs and monitor output connectors.
Details on USB interface and talkback microphone input.
Information on the IEC power connector and 48V phantom power switch.
Explanation of input gain, low cut filter, and equalization controls.
Details on the channel compressor and aux send routing.
Explanation of channel pan, mute functions, and EQ parameters.
Information on signal presence indicators and channel assignment.
Overview of controls for 2-track, USB, aux masters, and metering.
Details on internal effects, headphone, talkback, and main mix outputs.
Guidance on diagnosing and resolving common mixer problems.
Explanations of connector wiring standards for various audio cables.
How to use the mixer's USB interface for recording and playback.
A table listing and describing the mixer's built-in effects presets.