Need help?Do you have a question about the Mackie 1604-VLZ3 and is the answer not in the manual?
General| Type | Analog Mixer |
|---|---|
| Channels | 16 |
| Mic Preamps | 16 |
| Line Inputs | 16 |
| Aux Sends | 4 |
| Phantom Power | Yes |
| Effects | No |
| USB Interface | No |
| Power Supply | Internal |
| EQ | 3-band |
Quick start guide for setting up basic input levels and connecting to amplifiers.
Explanation of the mixer's flexible input/output connection design for easy patching.
Details on supplying phantom power to condenser microphones via the mixer.
Control for adjusting the output level of an individual channel.
Buttons to route channel signals to main mix or subgroups.
Switches and LEDs for isolating and monitoring individual channels.
Adjusts the stereo placement of a channel's signal.
Controls for shaping the low, mid, and high frequencies of a channel.
High-pass filter to remove unwanted low-frequency noise.
Controls for sending channel signals to external effects or monitors.
Controls the overall stereo output level of the mixer.
Controls the output level of subgroup mixes.
Switches to route subgroup signals to the main mix.
Connects and controls playback from tape decks or other stereo sources.
Chooses which signals are sent to control room and headphones.
Adjusts the listening volume for control room monitors and headphones.
Sets the behavior of solo switches (AFL or PFL).
Controls solo signal volume and provides visual feedback.
Visual indication of signal levels for monitoring.
Controls overall level for Aux Sends 1 and 2, and solo for aux mixes.
Sets the overall level of effects received from stereo return inputs.
Options for routing Stereo Return 3 to main mix or subgroups.
Option to route Stereo Return 4 to control room/phones matrix.
Enables soloing of all stereo returns simultaneously.
Information on product warranty, repairs, and obtaining service.
Steps to diagnose and resolve common channel, output, noise, and power issues.
Details on the balanced microphone connectors used by the mixer.
Information on stereo and balanced connections using TRS jacks.
Details on unbalanced mono connections using TS jacks.
Explanation of jacks with internal switches for routing or circuit interruption.
Description of unbalanced RCA connectors for audio equipment.
How to connect balanced and unbalanced audio signals.
Unique connection methods and insert jack usage.
How to handle stereo and mono signals for inputs and returns.
Using connectors to split or combine audio signals.
Detailed technical data including impedances, EQ, THD, and levels.
Measurements showing the mixer with the input pod in different orientations.
Dimensions for fitting the mixer into standard equipment racks.
Template for recording session details, dates, and notes.
Visual representation of how audio signals move through the mixer.
Details on product warranty coverage, duration, and claims.
To Next Page
