Do you have a question about the Mackie 1642-VLZ PRO and is the answer not in the manual?
Type | Analog Mixer |
---|---|
Channels | 16 |
Microphone Preamps | 8 |
Aux Sends | 4 |
Returns | 2 |
Phantom Power | Yes |
Effects | No |
USB Interface | No |
Line Inputs | 16 |
EQ Bands | 3-band |
Warnings and precautions regarding electric shock hazards during equipment servicing.
Advice to prevent fire or electric shock by avoiding exposure to rain or moisture.
Instructions for safe use of the polarized plug to prevent blade exposure.
Statements regarding compliance with Canadian and FCC regulations for radio noise.
Directive that service must only be performed by experienced repair technicians.
Information on how to contact Mackie Designs for technical support and assistance.
Statement regarding copyright protection and reproduction restrictions for the manual.
Details on noise levels, THD, crosstalk, and equivalent input noise.
Frequency response characteristics and input/output impedance values.
Details on the 3-band and 4-band EQ parameters.
Information on power consumption, weight, fuse ratings, and rack mounting.
Procedure for performing a leakage test on the unit before returning to the customer.
List of parts and part numbers for individual controls on channels 1-8.
Parts and part numbers for channels 9-16 and their associated controls.
Parts list for stereo channel controls like TRIM, EQ, PAN, MUTE, SOLO.
List of parts for Aux Send and Stereo Aux Return controls.
Parts list for meters, CR Source, and fader controls.
Details on rear panel connectors for Main Outs, Aux Sends, and Direct Outs.
Rear panel controls for Power and Phantom Power, including IEC connector.
Explanation of the part numbering system used in the manual.
List of main PCB assembly part numbers and their corresponding pages.
List of various cables and connectors with part numbers and descriptions.
Part numbers for PCB assemblies, front, bottom, and armrest panels.
List of hardware components like screws, nuts, washers, and bumpers.
Part numbers for different types of knobs, endcaps, and lipseals.
Includes bags, boxes, manuals, and power supply part numbers.
Part numbers for cables, power supply PCB, and transformer.
List of fuses, switches, IEC connectors, and other electrical components.
Parts like shields, clamps, brackets, and thermal compound.
List of potentiometers with part numbers, values, and reference designators.
List of resistors with part numbers, values, and reference designators.
List of capacitors used on the main PCB with part numbers and reference designators.
List of diodes, transistors, ICs, and connectors used on the main PCB.
List of potentiometers and resistors for the jackfield PCB.
List of capacitors used on the jackfield PCB.
List of integrated circuits, op-amps, and connectors for the jackfield PCB.
List of resistors and capacitors for the power supply PCB.
List of diodes, transistors, and voltage regulators used on the power supply PCB.
Part numbers for connectors, fuses, and standoffs on the power supply PCB.
List of disconnection cables and resistors for the mic input PCB.
List of various types of capacitors used on the mic input PCB.
List of diodes, transistors, ICs, and connectors for the mic input PCB.
Part numbers for common mode chokes and ferrite beads on the mic input PCB.