Maco MULTI - Safety and Warning Information; General Safety Precautions; Handling Damaged or Defective Hardware

- 3 -
MACO
MULTI
Safety and maintenance information
WARNING! Risk of injury due to improper maintenance
operations.
Improper maintenance can lead to serious
personal injury or material damage.
For this reason:
 ■Beforestartingwork,ensurethereissucient
room for carrying out assembly work.
 ■Ensurethattheassemblysiteiskeptcleanand
tidy. Loose components and tools lying around
or on top of each other can cause an accident.
Only use intact tools.
 ■Work,suchastheadjustmentofhardware–
particularly near to the pivot post and the scissor
stay – as well as the replacement of parts and
the hinging and unhinging of the sash must only
be carried out by trained, skilled personnel.
WARNING! Risk of injury due to heavy sashes.
Non-compliance can result in serious personal
injury or material damage.
For this reason:
 ■Correctlyassesstheweightofthesashbefore
starting work.
 ■Largeand/orheavysashesshouldalwaysbe
hinged and unhinged by several people.
Overloading can result in serious long-term ef-
fects (back problems).
WARNING! Windowswithdamagedordefectivehardware
components must be secured to prevent any kind
of use.
Damaged or defective hardware components must
be replaced immediately.
NOTE Whenreplacinghardwarecomponents,youmust
observe the relevant assembly instructions and/or
thepackageleaet.
Once hardware components have been replaced,
the plastic drive track retaining clip must be‚
‘snapped‘onrstoperation.Youmustalways
check that the repaired sash functions correctly.