Need help?Do you have a question about the Macurco OX-6 and is the answer not in the manual?
Explains the purpose and application of the Macurco OX-6 Oxygen Detector.
Details critical safety warnings and precautions for using the detector.
Describes the intended applications and environments for the OX-6 detector.
Specifies applications and conditions where the OX-6 should not be used.
Provides an overview of the OX-6's features and technology.
Lists the key features and capabilities of the OX-6 detector.
Details the technical specifications of the OX-6, including power, size, and ratings.
Guidance on where to mount the OX-6 unit for optimal performance.
Step-by-step instructions for installing the OX-6 unit.
Illustrates a common wiring diagram for a single garage installation.
Shows wiring diagrams for installing multiple OX-6 units.
Diagram showing how to connect the OX-6 to an alarm control panel.
Diagram showing connection to a specific control panel.
Shows an alternative wiring configuration for alarm control panels.
Explains the unit's self-test cycle upon initial power activation.
Describes how the OX-6 functions and displays readings during normal operation.
Lists the default settings configured at the factory for the OX-6.
Instructions for changing the default configuration settings.
Guide to configuring the power-up test feature.
Instructions for setting display and buzzer options.
Steps to select and configure alarm relay settings and mode.
Guide to setting fan relay activation, delay, and runtime.
Instructions for configuring trouble fan and latching settings.
Instructions for configuring the 4-20mA output feature.
Information on the unit's internal diagnostics and error reporting.
Explains how the 4-20mA signal indicates operational status or issues.
Lists and explains various error codes displayed by the OX-6.
Details substances that can degrade sensor performance.
General overview of required periodic maintenance for the OX-6.
Explains the signal indicating the sensor's warranty expiration.
Step-by-step guide for replacing the OX-6 sensor.
Instructions for resetting the sensor life after replacement.
Provides instructions on how to clean the exterior of the OX-6 unit.
General introduction to testing procedures for the OX-6.
Describes the procedure for performing a comprehensive operational test.
Guide to manually initiating individual tests for relays and outputs.
Details the procedure for testing the unit using oxygen gas.
Provides usage information for the Field Test Kit.
Specific steps for testing the fan relay function with gas.
Procedure for testing the alarm relay functionality with gas.
Steps to test the 4-20mA current loop output.
Detailed steps for calibrating the sensor in a clean air environment.
Details the warranty terms and conditions for the OX-6 detector.
General| Target Gas | Oxygen (O2) |
|---|---|
| Sensor Type | Electrochemical |
| Response Time (T90) | <30 seconds |
| Warranty | 2 years |
| Enclosure Rating | IP65 |
| Detection Range | 0-25% |
| Operating Temperature | -20°C to +50°C |
| Output | 4-20mA |
| Certifications | UL, CSA |
| Operating Humidity | 15-90% RH non-condensing |
To Next Page
