10
3 Use
The normal operating phase is remote
reading of meters through radio modules.
In AMR (xed) mode, each radio module
transmits the reading at a programmable
frequency. In mobile mode (Walk-By/Drive-
By), the radio module emits a data frame
with the measurements. To receive the ra-
dio module signal, hold a suitable receiver
near the meter. The xed (AMR) system
reads data automatically.
l
WARNING!
Reading of data can be per-
formed using various software.
Please consult the metering op-
erator for more information on
the specic use of reading soft-
ware.
Factory
conguration
Single mode Dual mode
wM-Bus wM-Bus LoRaWAN
Data sent
Tiny frame C1 (default):
current volume, date and
time, volume on billing
date, billing date, errors
Tiny frame C1 (default):
current volume, date and
time, volume on billing
date, billing date, errors
current volume, date and
time, volume on billing
date, billing date, errors,
daily consumption up to
7 previous days, alarms
Transmission time 08:00 - 18:00 08:00 - 18:00 00:00 - 24:00
Transmission
frequency
16 sec 30 secs 2 per day
Encryption not active not active native
Alarms (default)
backow (100 litres), suspected leak (observation frequency 15 min / observa-
tion period 48 hours), max ow rate (disabled)
Battery Duration 15 years 15 years
To Next Page
Loading...
Need help?
General