GU_GAS_TRACKER_V_1_00_US 15/18
If you have some signal, the pipe is here. The reason is simple: it is almost impossible to create a
false signal.
If you do want to prove that last statement, try this test:
- Do not start the transmitter.
- Start the receiver.
- Launch a Pin-Point calculation.
- Stomp on the ground, jump, start the engine of your car, make as much noise as possible
- With all these parasite noises, the highest value you may obtain would be around 20%.
The conclusion is simple : if you have 88%, 67%, 42% and even 31% … it means you are
listening to the transmitter’s signal; and it also means that your pipe is here … very close.
Limits of utilization of the GasTracker™.
Like any other device, the GasTracker™ has some limits. It will not work in 100% of the cases.
Nothing does.
Usually, our customer experience says that:
- A beginner operator will find 60-70% of the pipes he will be looking for.
- An expert locating operator will find 90-95% of the pipes he will search.
Customer testimonials can be found on our website, videos on YouTube®, and MADE® remains
accessible if you require any additional information about our product.
For more info, visit www.made-sa.com
To Next Page
Loading...