GU_GAS_TRACKER_V_1_00_US 8/18
The receiver
The GasTracker™ receiver is composed of two distinct parts: the listening device, which will listen
to the ground micro-vibrations, and the hand-held receiver that will display the results.
The receiver has two different modes: Prelocate, and Pin-Point.
- Prelocate:
Mode to quickly identify the area where the pipe is located.
- Pin-Point:
Mode to accurately locate and trace the pipe.
Knowing this, the ‘standard’ procedure of utilization of the receiver will be:
First, using the Prelocate mode, you quickly confirm the presence (or absence) of the pipe in a
designated area.
Second, once you know approximately where the gas service/line is, you switch to Pin-Point to
enable you to accurately find good spots, and trace your yellow dots on the ground.
Here is the face view of the receiver:
• ON/OFF buttons
• High visibility screen
• Change the gain
• Go to Prelocate mode
• Go to Pin-point mode / Start a new calculation
The receiver works with a rechargeable battery. Its autonomy is about 8 hours. The charger is
provided. The hand-held receiver supplies the listening device.
Like for the transmitter, we recommend to leave it charged overnight for a complete cycle.
To Next Page
Loading...