20
Pairing a Bluetooth Device
Before you begin, consult the owner’s manual for the Bluetooth device you want to pair with the
MS30BT.
1. Make sure the device is on and ready to receive a signal from the MS30BT. With the MS30BT
in “BT MODE”, press and hold the MODE (8) button.
2. Repeatedly press MODE until the unit displays PAIR ON, then press ►||/MUTE. The unit will
display PAIR and count down from 120 to 0. While the unit counts down, use your mobile device
Bluetooth function to search for a Bluetooth device.
3. When your mobile device has completed its search, the mobile device will display the
Bluetooth device name (MS30BT).
4. Select MS30BT. Once connected the Bluetooth Audio icon ( ) will appear on the radio LCD
display.
5. Enter the pairing password (0000), if requested.
After connecting successfully, you will be able to listen to audio stored on your Bluetooth enabled
device through the radio.
Answering a Call
When answering a call using the connected phone, Bluetooth audio play back will pause. After
hanging up from the call, Bluetooth audio will continue on some phones. It may be necessary to
press the play button to resume Bluetooth audio playback.
Bluetooth Audio (A2DP)
Selecting Tracks
During playback, press |<< (6) or >>| (7) to play the previous or next track.
Pausing Playback
During playback, press ►||/MUTE (9) to pause the Bluetooth audio playback. “BT PAUSE” will
appear on the LCD. Press ►||/MUTE again to resume playback. If you change to another mode,
playback will automatically pause. Press the MODE button (8) to return to Bluetooth mode and
resume audio playback from your Bluetooth enabled device.
NOTE: If a Bluetooth device is disconnected due to the power being turned off or if the device
goes out of range, the unit will automatically search for the matching Bluetooth mobile device
when the power is restored.
To Next Page
Loading...
