Why is my Madison MAD-CD10 remote control not working?
The remote control might not be working because the batteries are exhausted; replace them with new ones. Alternatively, the remote control might be too far from the main system, the controlling angle is too large, or there could be an obstacle in the way. Try operating the remote within the recommended operative range.
What to do if my Madison CD Player has no sound?
If your CD player isn't producing any sound, there might be several reasons: * Check if a disc is loaded. If not, load a disc. * Ensure the disc is loaded with the printed side up. * Confirm it is not in pause mode; cancel the pause mode if it is. * The disc could be dirty or scratched; try cleaning it or loading another disc.
What to do if my Madison MAD-CD10 is not receiving stations?
If your CD Player is not receiving stations, make sure the antenna is connected. If it is disconnected, connect the antenna. Also, ensure that the broadcast frequency is set properly.
Why does my Madison CD Player skip sound or track?
Skipping sound or track on your CD Player can occur if the disc is dirty or scratched. Clean the disc or try loading another one.
What to do if my Madison MAD-CD10 has interference?
If you are experiencing interference with your CD Player, it could be due to noise from an electric appliance. Try turning off unnecessary nearby appliances. It could also be related to a nearby TV set. If so, install the system further away from the TV set.
How to fix Madison MAD-CD10 CD Player not receiving the preset station?
If your CD Player is not receiving the preset station, it could be due to an incorrectly memorized station frequency; try memorizing the correct station frequency. Also, the preset memory might have been cleared if the AC input cord has been disconnected for more than a few days; memorize the station again.
What to do if my Madison MAD-CD10 CD Player has no tracks available to play?
If your CD Player shows no tracks available to play from a USB stick, ensure that the USB stick contains files. If not, add files to the USB stick. Also, check that the USB stick is formatted using the FAT32 file system; reformat it if necessary. Finally, make sure the files on the USB stick are in MP3 audio format; add MP3 audio files to the USB stick.
Safety and operating instructions to be retained for future reference.
Do's and Don'ts for safe use of the electrical appliance.
List of items included with the CD player unit.
Details of functions available on the remote control.
Illustrates how to connect external devices to the rear panel.
Instructions for playing Compact Discs and supported audio file types.
Steps to turn on the system and select FM radio mode.
Explains the three modes for tuning FM radio stations.
How to automatically save strong radio station frequencies.
Lists supported MP3 and WMA audio file formats.
Connect the system to an amplifier using RCA cables for audio output.
Diagnose and fix issues with the remote control.
Solutions for no sound or skipping tracks on the CD player.
Troubleshoot problems with receiving FM stations or presets.
Resolve issues related to playing files from a USB stick.
General| Supported radio bands | FM |
|---|---|
| CD changer | No |
| Device type | Personal CD player |
| MP3 playback | Yes |
| Product color | Black, Silver |
| Disc types supported | CD, CD-R, CD-RW |
| Preset stations quantity | 30 |
| Audio formats supported | MP3 |
| Package weight | 4000 g |
| USB 2.0 ports quantity | 1 |
Weight and Dimensions| Depth | 260 mm |
|---|---|
| Width | 265 mm |
| Height | 70 mm |
| Weight | 3000 g |
To Next Page