To Next PageTo Next PageWhat to do if my Madison MAD-CENTER200CD-BK have no sound?
If your Madison Speakers produce no sound, there could be several reasons: * Check if the speaker lead connection is secure and connect it properly. * Verify the audio frequency input terminal connection. * Ensure the mains plug and AC jack are securely connected. * Increase the volume if it's set to the minimum. * Make sure the speaker output is in the correct position.
Why won't my Madison Speakers turn on?
If your Madison Speakers won’t turn on, the power plug may not be plugged in properly or could be damaged. Try plugging it in again to ensure a secure connection.
What to do if my Madison Speakers remote control doesn’t work?
If the remote control for your Madison Speakers isn’t working, the issue might be: * Missing or exhausted batteries: Replace the batteries. * Out of operational range: Use the remote within its specified range.
General| Impedance | 4 Ω |
|---|---|
| Frequency range | 50 - 20000 Hz |
| RMS rated power | 100 W |
| Input sensitivity | 300 mV |
| Signal-to-Noise Ratio (SNR) | 75 dB |
| Peak Music Power Output (PMPO) | 200 W |
| Total Harmonic Distortion (THD) | 2 % |
| AC input voltage | 110 - 240 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 65 W |
| Speaker type | - |
| Number of drivers | 3 |
| Speaker placement | Floor |
| Audio output channels | 2.0 channels |
| Product color | Black |
| Recommended usage | Home |
| USB connector type | USB Type-A |
| USB 2.0 ports quantity | 1 |
| Connectivity technology | Wired & Wireless |
Weight and Dimensions| Depth | 214 mm |
|---|---|
| Width | 256 mm |
| Height | 1000 mm |
| Weight | 13100 g |
Explains safety warnings, hazard symbols like lightning and exclamation marks, and laser class warnings.
Details the meaning of warning symbols for electrical hazards, general risks, component safety, and laser radiation.
Outlines critical safety guidelines for unit operation, power connection, handling, and environmental exposure.
Describes the function of each numbered button on the device's front panel for playback, input selection, and volume control.
Details the usage of remote control buttons for power, input, playback, volume, EQ, and repeat modes.
Identifies and explains the MP3/AUX inputs, REC output, power switch, and power cable connection on the rear panel.
Guides on connecting the system according to the illustration, setting the input selector, and powering on the unit.
Provides solutions for common problems like no sound, distortion, unit not powering on, and remote control malfunctions.
Lists key technical details including output power, impedance, frequency response, voltage, dimensions, and weight for the multimedia column.
Confirms adherence to RED and ROHS directives, listing relevant standards and product details for the multimedia column.
