MadMan NTWB1 - User Manual

Questions and Answers

V
Vincent TaylorAug 1, 2025
What to do if no NMEA data is being received on my WiFi device from MadMan NTWB1 Network Router?
- C
  caguirreAug 1, 2025
  If you are not receiving NMEA data on your WiFi device, here are a few things to check: * Make sure your WiFi device is connected to the MadMan Network Router's network. * Verify that the orange light is flashing on the Network Router, indicating it is receiving data. * Confirm that your app or software is configured to listen to 169.254.1.1:55555. * Note that if one device is already connected with a TCP connection, other devices will not receive data unless using a repeater.
N
nharrisonAug 11, 2025
How to fix MadMan Network Router when there are no lights on the NTWB1?
- J
  jacobsrebeccaAug 11, 2025
  If there are no lights on the NTWB1, check the following: 1. Ensure the 12V supply to the NTWB1 is turned on. 2. Note that the NTWB1 may be in Sleep Mode to save power. It will wake up automatically every 5 minutes or when NMEA data is received. 3. Verify the polarity of the connection. The red wire should connect to +12V and the black wire to 0V (negative). If the polarity is reversed, swap the connections; the internal fuse will reset automatically.
A
alexis39Aug 19, 2025
What to do if I can't see the 'Madman xxxx' SSID in my available networks list for MadMan Network Router?
- R
  Raymond LewisAug 20, 2025
  If you cannot see the 'Madman xxxx' SSID, consider the following: * Refer to the 'No lights on the NTWB1' section to ensure the device is powered on. * Make sure your WiFi device is within range of the Network Router. * Try cycling the power or resetting your WiFi device in case of a 'glitch'.