OPERATION
MULTI-FUNCTION DISPLAY
78 Operating Manual MT 25 / 30 YT
Operating hours indicator
Fig. 69: Operating hours indicator
1 “Operating hours indicator” button
2 Display
You can check the number of operating hours with button 1.
If there are deviations from the specifications or other malfunc-
tions on the MT, you will be notified by the LED lighting up un-
der the button and a warning signal sounds, see “Indicators on
the multi-function display” on page 125.
Information selection
X Press button 1.
3 The number of operating hours is indicated
in the LCD display.
The selected indicator remains active until you switch
to a new indicator or switch off the ignition.
Fuel gauge
Fig. 70: Fuel gauge
1 “Fuel gauge” button
2 Fuel gauge
You can check the fuel supply with button 1.
If there are deviations from the specifications or other malfunc-
tions on the MT, you will be notified by the LED lighting up un-
der the button and a warning signal sounds, see “Indicators on
the multi-function display” on page 125.
Information selection
X Press button 1.
3 The fuel supply is shown in the LCD display in litres.
To Next Page
Loading...
