OPERATION
LIGHTING
50 Operating manual T225 / T230
Lighting
Headlight
Fig. 31: “Light” switch
The low beam and parking light can be switched on with a
two-position switch. It is installed in the instrument panel.
WARNING!
Accident hazard!
Accidents may occur when oncoming traffic is blinded
by the glare of a high-beam headlight.
X Always use low (dipped) beams when there is
oncoming traffic.
Switch on light
X Move the switch to level 1 by pressing it.
3 The parking light is switched on.
X Move the switch to level 2 by pressing it.
3 The headlight is switched on. The current setting of
the headlight is indicated on the combination display
instrument.
Hazard lights
Fig. 32: “Hazard lights” switch
Switch the hazard lights on whenever you have to stop
in an emergency. This alerts others to possible danger.
The switch for the hazard lights is installed in the instrument
panel.
Switching on the hazard lights
X Press the switch.
3 The hazard lights are on and the function LEDs for the
direction indicators on the combination display instrument
blink simultaneously.
0000000
°F
250
105
175
km/h
MPH
120
80
40
C
0 4/4
1/2
11-C26-067-007A-2
11-C26-067-008A-2
0000000
°F
250
105
175
km/h
MPH
120
80
40
°C
0 4/4
1/2
M
O
N
I
T
O
R
R
N
D
S
E
L
E
C
T
MODE
To Next Page
Loading...
