MAG TOOLS MCF894 - 18 V Cordless Impact Wrench MCF894; Technical Data

2
ENGLISH
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of workpatterns.
EC-Declaration of Conformity
Machinery Directive
18V Cordless Impact Wrench
MCF894
Mac Tools declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-2:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact Mac Tools at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofMac Tools.
Markus Rompel
Director Engineering
Mac Tools, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
03.11.2017
18V CORDLESS IMPACT WRENCH
MCF894
Congratulations!
You have chosen a Mac Tools tool. Years of experience,
thorough product development and innovation make Mac
Tools one of the most reliable partners for professional power
toolusers.
Technical Data
MCF894
Voltage V
DC
18
Type 1
Battery type Li-Ion
Power output W 580
No load speed
1st speed min
-1
0–900
2nd speed 0–2000
3rd speed 0–2000
Impact rate min
-1
0–3100
Max. fastening torque Nm 447
Max. breakaway torque Nm 813
Tool holder 1/2"
(13 mm)
Weight (without battery pack) kg 1.57
Noise values and vibration values (triax vector sum) according to EN60745-2-2:
L
PA
(emission sound pressure level) dB(A) 94
L
WA
(sound power level) dB(A) 105
K (uncertainty for the given sound level) dB(A) 3
Vibration emission value a
h
= m/s
2
13.5
Uncertainty K = m/s
2
4.4
Battery pack MB200 MBR183 MBR184
Battery type Li-Ion Li-Ion Li-Ion
Voltage V
DC
18 18 18
Capacity A
h
3.0 2.0 5.0
Weight kg 0.64 0.40 0.70
Charger MCB101, MCB115
Mains voltage V
AC
230 V
Battery type Li-Ion
Approximate min 22 30
charging time (1.5 Ah) (2.0 Ah)
of battery packs 45 75
(3.0 Ah) (5.0 Ah)
Weight kg 0.49