Magellan eXplorist 600 - Starting a New Active Track Log

Track Logs
60
Starting a New Active Track Log
Before you can start a new active track log, you need to stop the one that is presently
recording.
1. Press
MENU.
2. Use the Arrow joystick to highlight Track Log.
3. Press
ENTER.
4. Use the
Arrow joystick to highlight Active Track.
5. Press
ENTER.
6. Highlight
Stop Logging. (If Resume Logging is displayed, the Track Log has
already been stopped. Go to step 10.)
7. Press
ENTER.
8. Use the
Arrow joystick to highlight Active Track.
9. Pr
ess
ENTER.
10. Highlight
New Track.
11. Press
ENTER.