Magellan eXplorist 600 - Saving an Active Track Log

Track Logs
61
Saving an Active Track Log
This will save your active track log with a name you enter that you can use at some time in
the future. This does not erase your presently active route; only saves the current active
track and adds it to the list of available track logs.
1. Press
MENU.
2. Use the
Arrow joystick to highlight Track Log.
3. Press
ENTER.
4. Use the
Arrow joystick to highlight Active Track.
5. Press
ENTER.
6. Highlight
Save.
7. Press ENTER.
If there are not enough track points to save, an alert will be displayed, informing
you of the same and canceling the save.
8. Select the folder where you want the track log saved.
9. Highlight
Save in here and press ENTER.
10. Use the Arrow joystick and ENTER button to assign a name for the track log.
11. Use the
Arrow joystick to highlight OK when the name has been entered.
12. Press
ENTER.