Need help?Do you have a question about the Magellan MG5000 and is the answer not in the manual?
General| Partitions | 2 |
|---|---|
| Wireless Zones | 32 |
| Event Buffer | 256 events |
| Display | LCD |
| Touchscreen | No |
| Zones | 32 |
| Remote Controls | 32 |
| Wireless Sirens | Not supported |
| Wireless Repeaters | 2 |
| Operating System | Proprietary |
| Power Supply | 16.5 VAC |
| Communication Ports | 1 RS-232 |
| Operating Temperature | 0°C to 50°C |
Details how to arm all zones in a selected partition.
Explains how to arm the system while allowing movement in specific areas.
Describes how to arm the perimeter while allowing free movement inside the premises.
Explains how to arm the system immediately without an exit delay.
Explains how to disarm the system and deactivate an active alarm.
Allows programming the system to ignore specified zones the next time it is armed.
Details the system's response to fire alarms and how to handle them.
Explains how programmable outputs (PGMs) can be used for various functions.
Lists and explains various trouble conditions reported by the system.
Details how to create, modify, and delete user access codes.
Explains how to trigger panic alarms for police, medical, or fire.
To Next Page
