Magellan MG5000 - Communicator; System Options

Communicator
System Options
Step 1:
Press []
Step 2: Enter Master Code
(default: 1234)
Step 3: Select a menu:
[] User
[
TBL] Delay
[MEM] Communicator
[
BYP] System Options
Step 4: Select the desired personal
number or pager number by
pressing the corresponding key
Step 5: Per #1 to #5 Pager #
Step 6: Tel. # + [
ENTER]
Pager # +
[
ENTER]
Step 1:
Press []
Step 2: Enter Master Code
(default: 1234)
Step 3: Select a menu:
[] User
[
TBL] Delay
[
MEM] Communicator
[BYP] System Options
Step 4: Select the desired setting by
pressing the corresponding key
Auto Arm Lost Remote(s)
Step 5:
HH:MM
(24Hr clock)
Press on all
available
remotes. Press
[
ENTER]
Step 6: [1] Regular
[2] Sleep
[3] Stay
Press and hold
[
SLEEP] to erase
all lost remotes
Notes
To call/answer WinLoad, send a test
report, or cancel all communications
including WinLoad, press the
corresponding key after entering the
Communicator menu.
Call/Ans.WinLoad
Per # 3
Per # 5
Pager #
Cancel Comm.
Per # 4
Per # 2
Per # 1Test Report
Step 5
Step 6
AutoArm Part.1
SquawkRemote*
No Exit Delay on Rem.*
SquawkKeypad*
Lost RemoteAutoArm Part.2
Notes
* To toggle squawk keypad, squawk
remote, and no exit delay on remote
options on and off, press the
corresponding key after entering the
System Options menu.
Step 5
Step 6