N477 User Manual Page 23
8 Bluetooth
Please note that not all of the features of
the N477N477 Bluetooth will work with all
phones as features of cellular phones vary
from manufacturer to manufacturer.
Pairing your Bluetooth-ready Phone for
the First Time
Before you use the Bluetooth function
of the N477 receiver you must pair your
Bluetooth-ready phone to the N477. A list
of compatible phones can be found on the
Magellan web site at www.magellangps.com/
support. Before beginning you should have
the instructions supplied with your phone
for questions about accessing the Bluetooth
pairing mode for your phone.
1. From the Map screen, tap the Bluetooth
icon.
2. Tap the Settings icon.
3. Tap Pair Phone Now.
4. Enable Bluetooth on your phone. (See
instructions supplied with your phone for
any questions.)
5. On your phone, begin the searching for
Bluetooth device function.
6. Select N477 from the list of devices found.
7. The Bluetooth phone will begin
communicating with the N477. When
prompted, enter ‘1234’ as the passcode
on your phone.
8. Your phone may ask to connect to the
N477. (If not, refer to your phone manual
for connecting to a Bluetooth device.)
9. When connected, the N477 will ask if you
want to accept the connection. Tap Yes.
10. Wait while the communication is
established.
11. You may now import contacts from your
phone. Tap Yes to begin importing. (If
you choose not to import your contacts
now you can do so later from the
Bluetooth Settings menu.)
12. You may need to confirm on your phone
to accept connection from the N477.
13. When the contacts have been
successfully imported a confirmation
screen is displayed.
14. The Bluetooth Settings screen is
displayed.
Bluetooth Settings
Accessing the Bluetooth Settings
1. From the Map screen, tap the Bluetooth
icon.
2. Tap the Settings icon.
3. Enabling/Disabling Bluetooth
4. Access the Bluetooth Settings screen.
5. Check Enable Bluetooth to turn Bluetooth
on; uncheck to turn Bluetooth off.
6. Enabling/Disabling Auto Connect
7. Access the Bluetooth Settings screen.
8. Check Auto Connect to set the N477
receiver to auto connect to your paired
Bluetooth phone when it is in range;
unchecked turns off auto connect.
Enabling/Disabling Audible Maneuver
Warning
1. Access the Bluetooth Settings screen.
2. Check Audible Maneuver Warning to
turn it on; uncheck to turn it off. (When
Audible Maneuver Warning is enabled
you will hear a beep when a maneuver
is needed and you are in the middle of a
phone conversation.)
Pairing Additional Bluetooth-ready
Phone
1. Access the Bluetooth Settings screen.
2. Tap Pair Phone Now.
To Next Page