MICROWAVE OVEN CARE
Cleaning the exhaust filters Surface light replacement
Disconnect the power cord before cleaning or
leave the door open to deactivate the oven during cleaning.
To avoid risk of personal injury or property damage, do
not operate oven hood without filters properly in place.
The oven ventilation exhaust filters should be removed and
cleaned often; generally at least once every month.
1. To remove the exhaust ventilation filters, slide the filter to
the rear. Then pull filter downward and push to the other
side. The filter will drop out. Repeat for the 2nd filter.
side slot, then push up and toward oven to lock.
Reinstall the 2nd filter using the same procedure.
2. To reinstall the exhaust ventilation filter, slide it into the
Front
Rear
Surface lights
Ventilation
filters
To avoid risk of personal injury or property damage, wear
gloves when replacing the light bulbs.
1. Unplug the microwave oven or turn off power at the main
circuit breaker.
2. Remove the bulb cover mounting screw at light position
under the microwave.
3.
Replace bulb with 30 watt appliance bulb.
4.
5. Plug the microwave back into the power supply or turn
the power back on at the main circuit breaker.
Re-install bulb cover and mounting screw.
To Next Page
Loading...
Need help?
General
