1). Press "CLOCK AM/PM",the unit enters the clock setting
2). Press "CLOCK AM/PM" again to select AM or PM. The
3). Press the number keys and enter the correct time. For
example, time is 10:12 now, please press "1,0,1,2" in turn.
4). Press "CLOCK AM/PM" key finish setting the clock.
Note:
a. This is a 12 hour clock from 1:00 to 12:59. If the time set is
not appropriate, press "CLOCK AM/PM" will be no used.
b.
At most two stages can be input.
For example: to cook the food with 100% microwave power
for 10 minutes and then cook with 80% microwave power for
15 minutes. Do as following:
1) Press " TIME COOK " to choose microwave
cooking;
2) Press "1","0","0","0" to input the cooking time;
cooking;
Note:
program and auto menu cannot be set here.
b.When the first stage finish, buzzer sounds once and the
second stage begins cooking.
1) Press
"
TIME COOK
"
to select microwave
cooking. "0:00" flash to remind you to input the cooking
time.
2) Press the number keys to adjust the cooking time you
need. For example, to cook the time for 10 minutes.Please
press "1,0,0,0" in turn. The maximum cooking time is 99
minutes 99 seconds.
3) At the same time, you can choose the power by pressing
"POWER ".
4) Press the number keys to select the power level.
down.
Note:
1) If the power level you choose is 100% power, steps "3"
and "4" can be skiped and go directly to the step "5".
2) After cooking finishing, buzzer sounds five times.
10
9
8
7
6
5
4
3
2
1
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
PL10
PL9
PL8
PL7
PL6
PL5
PL4
PL3
PL2
PL1
LEVEL
POWER DISPLAY
Ten power levels are available:
3)
Press "TIME COOK " to choose microwave
a.Microwave cooking can be set as two stages only. Defrost
4)
5)
Press "POWER " to select the microwave power;
Press "10" to choose 100% microwave power;
6) Press "1","5","0","0" to input cooking time;
7) Press "POWER " to select the microwave power;
8) Press "8" to choose 80% microwave power;
9) Press "START/PAUSE" to start cooking.
1) Press "DEFROST AUTO/TIME" once to choose defrost by
weight function. 0.0 will flash and "lb" indicator flash;
2) Press number keys from 0 to 9 to input the derfost weight.
For example: the food weight is 1.2 Lbs, then "1","2" will
be input. The maximum cooking weight is 6.0 Lbs.If the
weight input is more than 6.0 Lbs, the unit will turn back to
waiting state.
3) Press "START/PAUSE" to start defrosting. "lb" indicator
will be off.
1) Press "DEFROST AUTO/TIME" twice to choose defrost by
2) Press number keys from 0 to 9 to input the derfost time.
The maximum time can be input is 99 minutes and 99
seconds.
3) Press "START/PAUSE" to start defrosting.
Note:
time function.0:00 flash and defrost indicator will light;
5) Press "START/PAUSE" to start cooking. Time counts
input the time.
states. AM indicator will light. "0:00" flash to remind you to
responding AM or PM indicator lights.
Buzzer sounds twice and turn back to waiting states.
c.
During cooking,each added press on "ADD 30 SEC.", 30 seconds
can be added too.The time can be up to 99 minutes and 99 seconds.
If half the defrost time passes, the buzzer will sound once to
remind you to turn the food over. In both weight/time defrost,
the defrost icon is blinking on screen during the operation to
indicate that defrost is being done.
Clock Setting
Microwave Cooking
Multi stage Cooking
Defrost Cooking
A. Defrost by Weight
B. Defrost by Time
OPERATION INSTRUCTIONS
To Next Page
Loading...
Need help?
General
