For the best performance and op!mal results, the filter assembly must be cleaned regularly.
For this reason, it is a good idea to remove larger food remnants trapped inside the filter
a#er each wash cycle by rinsing the filter assembly under running water. To clean the coarse
filter and the fine filter, use a so# cleaning brush. Reassemble the filter parts as shown in
the diagram and reinsert the en!re assembly into the dishwasher by posi!oning the filter
into its seat and pressing downward.
To remove the filter assembly, grab the handle of
the fine filter, rotate it counter clockwise, and then
pull the filter in an upward direc!on.
Step 1: Rotate the fine filter counter clockwise.
Step 2: Li# fine filter up.
Step 3: Li# main filter up.
NOTE: Reverse the above procedure to reinstall the filter.
Summary:
A) Inspect and clean the filters a#er every dishwashing use.
B) By unscrewing the coarse filter you can remove the filter system. Remove any
food remnants and clean the filters under running water.
Never run the dishwasher without the filters installed. Improper
replacement of the filters may reduce overall performance of the appliance, and
subsequently damage dishware and utensils. The en"re filter system should be cleaned at
least once a week. When cleaning the filters do so carefully, otherwise filters may lose their
shape, degrading the performance and overall effec"veness of the dishwasher.
Filter Assembly Parts
WARNING
!
WARNING
!
-PAGE 21-
To Next Page
Loading...
Need help?
General
