Magic Chef MCSCD6W3 User Manual

PROBLEM POSSIBLE CAUSES POSSIBLE SOLUTION
The dishes are not clean.
The dishes were not loaded
correctly.
See “Loading Dishwasher” secon of the user manual.
The selected program was not
the appropriate cycle sequence
for the condion of the dishes.
Select a more intense program to compensate for the
condion of the dishware.
Not enough detergent was
dispensed.
Use more detergent, or change the type of detergent being
used by the dishwasher.
Cloudiness on the
glassware.
Items are blocking the rotaon
path of the water spray arm.
Rearrange the items accordingly so that the spray arm can
rotate freely.
The filter assembly at the base
of the unit is not clean, is
clogged, or is not installed
correctly. This may clog the
spray arm jets.
This is a combinaon of so
water and too much detergent.
Clean and properly secure the filter into its seat and fit the
filter assembly correctly into the unit. Clean the spray arm
jets. See the “Care and Maintenance” secon of this
manual.
Use less detergent if you have so water, and select a
shorter wash cycle sequence to clean the glassware.
Black or gray marks on
dishware.
Aluminum utensils have
rubbed against the dishes.
Use a mild abrasive cleaner to remove the marks.
Dishware blocked the detergent
cups, prevenng them to open
fully during the wash cycle.
Rearrange the dishes accordingly and rerun the wash cycle
sequence.
The dishes are not dry. Improper loading of dishware. See “Loading Dishwasher” secon of the user manual.
Too lile rinse aid. Increase the amount of rinse aid dispensed or refill the
rinse aid dispenser if empty.
Dishes were removed from the
washer too soon.
Do not empty your dishwasher immediately aer the cycle
ends. Open the door slightly, so that the steam can escape.
Begin unloading the dishwasher once the dishes are barely
warm to the touch.
Detergent le inside the
dispenser cups.
Wrong wash cycle sequence
selected.
Shorter wash cycle sequences use lower temperatures with
lower cleaning performance capabilies. Choose a wash
cycle with a longer wash me to resolve this issue.
Using cutlery with a low quality
coang.
Water drainage is more difficult with these items. Cutlery
or dishes of this type are not suitable for dishwasher use.
ERROR CODE:
E1
E4
E1: Water Intake Problem.
E4: Overflow Problem.
E1: Faucet is not open, restricted intake, or low pressure.
E4: Some element of the dishwasher is leaking. Turn main
water supply off, immediately! Clean water around base.
-PAGE 24-

Magic Chef MCSCD6W3 Specifications

General

Brand	Magic Chef
Model	MCSCD6W3
Category	Dishwasher
Language	English