25
Clean Inlet Filter
If tap is fully opened and there is an insufficient amount of water coming through the hose, you may
need to clean your hoses and Inlet filter.
Remove foreign matters from Coin Trap
Coin Trap can collect small objects from the wash cycle. Clean out the coin trap regularly to ensure
normal operation of washing machine.
Step 1: Open the
coin trap door
Step 2: Turn the
knob clockwise
Step 3: Pull out the
coin trap and
remove articles
Step 4: Place drain
pan under to catch
excess water
1. Close the tap entirely before cleaning.
2. Select any procedure on control knob and press the [Start/Pause] button and let run for about 40
seconds.
Wall Connection
3. Remove the hot and cold water hoses from the wall and back of the unit.
4. Run warm water through both hoses.
5. If your wall connection has a built-in filter, pull out filter with long nose pliers and wash under warm
water.
Unit Connection
6. Unscrew the inlet pipe from the backside of the machine.
7. Pull out the filter with long nose pliers and wash under warm water.
8. Reconnect the inlet pipe
9. Open the tap and make sure there is no water leakage.
Note: Generally, the tap filter should be washed first and then the filter to the washing machine.
To Next Page
Loading...
Need help?
General
