12
CONTROL PANEL
CONTROL PANELCONTROL PANEL
CONTROL PANEL
WATER LEVEL
FUNCTION
DELAY
PROGRAM
CHILD LOCK
TEMPERATURE
START/PAUSE
POWER
Press this button to select water
level. The indicator lights will move
each time the button is depressed.
• Press this button to select wash time.
• Press this button to select rinse time.
• Press this button to select spin time.
Press this button to preset the
delay function. For less than
24 hours, each time the button
is depressed, the time delay is
an hour. For 24+ hours, each
time the button is depressed,
the time delay is 6 hours.
After 48 hours, the preset
indicator will reset.
Press this button to select fully
automatic programs like:
Normal (Light) Quick (Flash)
Jeans (Light) Anti-Wrinkle (Flash)
Cotton (Light) Air Dry (Flash)
Press the “Water Level” button
and “Function” buttons at the
same time to engage the lock
feature. Press the “Water Level”
And “Spin” button at the same
Time to disengage the child lock.
Press this button to set either HOT
or COLD water for the wash cycle.
When the HOT and Cold indicator
lights are both lit, both water inlets
are activated for WARM water.
• ON/OFF Power
• Automatic Power
Press this button after program
selection to start the washer.
Press this button again to pause
the current program. Press this
button once more to continue
the currently selected program.
NOTE: To protect the electrical components and circuits of the control panel, the ON/OFF power
button should not be depressed more than once within 30 seconds.
To Next Page
Loading...
Need help?
General
