9
BEFORE OPERATION
SETTING THE CLOCK
When the oven is first plugged in, the display will show “:0” and a tone will sound. If the AC power ever goes off,
the display show “ : 0” when the power comes back on.
1. Touch CLOCK pad.
This is a 12 hour clock system.
2. Touch CLOCK pad once more.
This is a 24 hour clock system.
3. Enter the correct time of day by
touching the numbers in
sequence.
4. Touch CLOCK pad.
NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will sound.
Touch the CLOCK pad and re-enter the time.
The display stops blinking, and the
colon starts blinking. If you selected
12 hour clock system, this digital
clock allows you to set from 1:00 to
12:59. If you selected 24 hour clock
system, this digital clock allows you to
set from 0:00 to 23:59.
NOTE : This oven has multiple
clock systems.
If you want 12 hour clock
system, omit this step.
DEAN-MCMY10SCC-C-926T9A(영) 2005.7.5 5:22 PM 페이지9
To Next Page
Loading...
