10
Child lock : The child lock prevents the oven from being used. For example because children could hurt
themselves on hot liquids etc.
Power save mode : This function is used for saving energy.
To set child lock
1. Touch STOP/CLEAR pad.
" : 0" or clock appears in the
display.
2. Touch and then hold
STOP/CLEAR pad for 3 seconds.
3. To cancel child lock simply repeat
procedure 2.
To set power save mode
1. Touch STOP/CLEAR pad.
" : 0" or clock appears in the
display.
2. Touch and then hold Clock pad
for 3 seconds.
3. To cancel power save simply repeat setting procedure.
The oven will Lock indicator lights.
Now the oven cannot be operated.
The oven will beep and lock indicator
disappears. The oven is again
available for normal use.
The display will turn off and a beep
sounds.
To operate the oven in power save
mode, touch any key.
Then " :0" or clock will be shown and
the operation of all function key will
be same as in the normal mode. But
if there is no operation within 10
seconds in clear mode or while
manipulating the key, all the contents
of display will disappear.
The power save mode will be
canceled and a beep sounds.
The oven is again available for
normal use.
CHILD LOCK AND POWER SAVE MODE
DEAN-MCMY10SCC-C-926T9A(영) 2005.7.5 5:22 PM 페이지10
To Next Page
Loading...
Need help?
General
