WARNING! Always turn the power off when you are stationary to prevent
unexpected movement.
6.2 Rain and Water
The joystick hand control unit IS NOT WATERPROOF. The joystick module is splash proof
but may be permanently damaged if water transgresses the rubber seals (this damage is not
covered under warranty).
We recommend carrying a plastic bag large enough to cover the joystick module and the
user’s hand, in case of rain.
6.3 Joystick lead
If for any reason, the joystick lead is disconnected take care when reconnecting, do not force
the plug into the socket. The lead is polarised and should only be fitted one way.
STOP! Forcing the plug into the socket the wrong way can permanently
damage the electronics system. Also, do not place the lead so that it can be
pinched in the seat frame or the power base frame.
6.4 Controller program
The controller program affects speed, acceleration, deceleration, and braking. The drive
mode settings are preset at the factory. If your Magic Mobility Dealer changes these settings,
please make note of these changes.
WARNING! Do not attempt to reprogram your chair. Only the power chair
manufacturer, an authorised representative of the manufacturer, or a trained
service technician should program the controller.
6.5 Hand control joystick operation
To Next Page
Loading...
Need help?
General
