'
JP17: Power Lost Resume
This jumper allows user to use the switch of ATX power supply to control ON/
OFF switch directly instead of using the power switch on the motherboard.
NOTE: This feature must work with BIOS. Please refer to the BIOS Power On
After PWR-Fail sector.
Power Lost Resume JP17
Enabled
!
Normal (default)
!
JP20 / JP21 / JP22: Intel / Cyrix CPU Select
CPU TYPE
Intel CPU (Default)
Cyrix Joshua CPU
JP22
!
!
JP21
!
!
JP20
!
!
JBAT1: Clear CMOS data
Clear the CMOS memory by shorting this jumper 2 & 3 momentarily, and then
remove the cap back to 1 & 2 to retain original CMOS setting.
JBAT1
Clear CMOS Data
Retain Data (default)
JBAT1