Magicard Prima 4 - Page 37

37
Setting example for double-sided printing and bottom side lamination
(Heat-resistant PET-G card)
Film 1mil 0.6mil Overlay
Ambient Condition
Temperature
15 °C to 28 °C
Humidity
35 % to 60 %
Laminator
CL-600D
Temperature (Bottom Side) 155 °C 155 °C 125 °C
Speed 5.0 mm/s 12.0 mm/s 5.0 mm/s
Cooling Time 0 sec
Card Printer
CX-D80
Retransfer
Settings
Temperature Level +2 +2 +2
Speed (Front) 0 0 0
Speed (Back) +2 +2 +2
Bend Remedy Temperature Level Off Off Off
Setting example for single-sided printing and bottom side lamination
(Heat-resistant PET-G card)
Film 1mil 0.6mil Overlay
Ambient Condition
Temperature
15 °C to 28 °C
Humidity
35 % to 60 %
Laminator
CL-600D
Temperature (Bottom Side) 155 °C 160 °C 130 °C
Speed 5.0 mm/s 12.0 mm/s 5.0 mm/s
Cooling Time 0 sec
Card Printer
CX-D80
Retransfer
Settings
Temperature Level +2 +2 +2
Speed (Front) 0 0 0
Speed (Back) +2 +2 +2
Bend Remedy Temperature Level Off Off Off
■
■