Need help?Do you have a question about the Magmaweld ID 250T DC PULSE and is the answer not in the manual?
General| Welding Current Range | 10-250A |
|---|---|
| Input Voltage | 230 V |
| Protection Class | IP21S |
| Weight | 13.5 kg |
| Duty Cycle | 60% at 250 A |
Explains safety symbols, general precautions, and electrical safety measures for user awareness.
Covers health risks from fumes, noise, arc light, mechanical hazards, and environmental safety.
Details fire/explosion prevention, safe maintenance, confined spaces, transport, and wire handling.
Addresses EMC, EMF, overheating, energy efficiency, and waste disposal for safe operation.
Provides an overview of the machine's features and identifies its key components with a diagram.
Details information on the product label and lists comprehensive technical specifications including duty cycles.
Lists standard and optional accessories available for the welding machine, with product codes.
Instructions for unpacking, checking contents, and preparing the installation site for optimal performance.
Guides for safe electrical connection and gas supply setup, including plug and mains connection.
Covers connecting torch, pedal, earth clamp, and replacing the tungsten electrode for TIG welding.
Explains the control panel layout, buttons, and display for parameter adjustment and mode selection.
Details TIG welding cycles, menu structure, processes, and specific modes like 2/4 stroke and pulse.
Explains operation for Pulse DC TIG and MMA welding modes with parameter recommendations.
Outlines regular and non-periodic maintenance tasks for machine upkeep and longevity.
Lists common error codes, their reasons, and recommended solutions for troubleshooting.
Visual representation of spare parts within the machine, with numbered components.
Detailed list of part definitions and their corresponding material codes for both models.
Schematic diagram illustrating the electrical connections and components of the machine for technical reference.
To Next Page
