Need help?Do you have a question about the Magmaweld ID 300E and is the answer not in the manual?
Details electrical hazards, shock prevention, and emergency procedures.
Addresses risks from hot parts, sparks, noise, and protection measures.
Covers prevention of fire, explosion, and machine overheating.
Guidelines for managing electromagnetic interference and EMF exposure.
Provides a general description of the welding machine's features and technology.
Details and labels all the physical components of the welding machine.
Contains critical product ratings, certifications, and label information.
Lists technical data specifications and available accessories.
Ensures all ordered materials are received and checks for damage.
Provides guidance on optimal placement, ventilation, and environmental conditions.
Details on mains plug connection and connecting the machine to the power supply.
Instructions for connecting MMA welding cables to the appropriate outlets.
Instructions for connecting the TIG torch, gas, and power cables.
Explains the front panel layout, displays, buttons, and adjustment pots.
Guide for setting up and performing MMA (stick) welding operations.
Instructions for setting up and performing Touch-Scratch TIG welding.
Details on using optional wired remote controls for machine operation.
Covers daily checks and bi-annual maintenance for optimal performance.
Lists common error codes, their causes, and recommended solutions.
Provides a list of available spare parts with their material codes.
Illustrates the overall functional blocks and data flow of the machine.
Presents the detailed electronic circuit schematic of the welding machine.
General| Input Voltage | 230 V |
|---|---|
| Welding Current Range | 20-300 A |
| Open Circuit Voltage | 70 V |
| Protection Class | IP21S |
| Electrode Diameter | 1.6-5.0 mm |
| Power Supply | Single Phase |
| Duty Cycle | 60% |
To Next Page