What to do if my Magner Magner100 machine is not counting notes properly and shows chain or double errors?
If your Magner Cash Counters & Coin Sorters machine is not counting notes correctly and frequently displays chain or double errors, ensure that you place the banknotes correctly on the hopper. You may also need to adjust the insert gap by turning the gap adjustment knob.
Why won't my Magner Magner100 Cash Counters & Coin Sorters machine start counting when I put banknotes on the hopper?
If your Magner Cash Counters & Coin Sorters machine doesn't start counting when you place banknotes on the hopper, first ensure that the stacker is empty after completing a batch. Remove the notes from the stacker. Also, check the stacker sensor for any issues.
How to fix a Magner Magner100 Cash Counters & Coin Sorters machine that frequently causes double errors?
If your Magner Cash Counters & Coin Sorters machine frequently causes double errors, refer to the troubleshooting steps for when the machine is not counting notes properly. Additionally, clean the machine following the maintenance guidelines.
What to do if my Magner Cash Counters & Coin Sorters power is not turned on?
If the power is not turning on for your Magner Cash Counters & Coin Sorters, check the power cable connection and ensure the power switch is turned on. Also, check if the USB cable is connected; if it is, try removing it.
General| Brand | Magner |
|---|---|
| Model | Magner100 |
| Category | Cash Counters & Coin Sorters |
| Language | English |
User can count all currencies without recognition and detection.
DDL means Double Detection Level in Count Mode. User can select 1~8 levels.
In this Mode, the machine can recognize and detect EURO currency.
In this Mode, the machine can recognize and detect USD currency.
Machine only can count notes in Local currencies Mode except WON (Korea) Mode.
User can select batch number which is registered already. (5, 10, 20, 50, 100)
If you want to detect counterfeit during counting, press CF Key.
When press and hold down ADD Key, you can enter ADD or G.TOTAL Mode.
When press and hold down ADD Key, you can enter ADD or G.TOTAL Mode.
You can count all denomination of selected currency without any selection.
The machine sorts out the same denomination with first inserted note.
The machine sorts out the same denomination and version with first inserted note.
You can sort the selected denominations.
Configure printer settings like baud rate, paper size, font, and print number.
To Next Page
