Magner Magner100 - USER Mode; Printer Settings

MAGNER100 USER MANUAL
Magner INT 22
6. USER Mode
Move cursor to upside or downside.
Enter item.
Move cursor to left or right.
Go to higher mode or exit User Mode
1. PRINTER SET
1.PRINTER MODE p1/1
=======================================
>>1. BAUD RATE : 115200BPS
2. PAPER SIZE
: 3 INCH
3. FONT : 12 X 24
4. BLANK OF TAIL
: 5 LINE
5. PRINT NUMBER : 1 PIECE
6. PAPER CUTTING
: NO
=======================================
Press and hold down MODE Key.
USER Mode is shown.
USER MODE p1/1
=======================================
>>1. PRINTER SET
2. USER ID
:” NONE “
3. ID PRINT
:NO
4. LCD LANGUAGE
:ENGLISH
5. SP SELECT :REFRESH
6. WARNING BUZ :ON
7. CF KEY :LOCK
8. COMMA :ENABLE
9. STOP STATE :HOLDING
10. STACKER BRAKE :ON
=======================================