EasyManuals Logo

Magnetek Flex 12EX2 User Manual

Magnetek Flex 12EX2
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Flex 12EX2 Standard, AB and Tandem Instruction Manual
November 2017
Page 8 of 56
2 Radio Controlled Safety
WARNINGS and CAUTIONS
Throughout this document WARNING and CAUTION statements have been deliberately placed to
highlight items critical to the protection of personnel and equipment.
NOTE: A NOTE statement is used to notify people of installation, operation, programming, or
maintenance information that is important, but not hazard-related.
WARNINGS and CAUTIONS SHOULD NEVER BE DISREGARDED.
The safety rules in this section are not intended to replace any rules or regulations of any applicable local, state, or
federal governing organizations. Always follow your local lockout and tagout procedure when maintaining any radio
equipment. The following information is intended to be used in conjunction with other rules or regulations already in
existence. It is important to read all of the safety information contained in this section before installing or operating the
Radio Control System.
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, could result in minor or
moderate injury. It may also be used to alert against unsafe practices.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Magnetek Flex 12EX2 and is the answer not in the manual?

Magnetek Flex 12EX2 Specifications

Frequency Specifications IconFrequency Specifications
frequency range433.050MHz - 439.600MHz
number of channels62 channels
channel spacing50 KHz
Transmitter Specifications IconTransmitter Specifications
transmitting range>100 meters
transmitting power1.0 mW
transmitter operating voltage3.0VDC
Receiver Specifications IconReceiver Specifications
receiver sensitivity-116 dBm
receiver power consumption22VA (max)
available receiver voltages9 - 36VDC, 24VAC, 42VAC, 48VAC, 110 - 120VAC, 220 - 240VAC, 380 - 400VAC, 410 - 460VAC
Physical Dimensions and Weight IconPhysical Dimensions and Weight
transmitter dimension244 mm (L) x 70 mm (W) x 44 mm (H)
receiver dimension260 mm (L) x 204 mm (W) x 83 mm (H)
transmitter weight341 g / 12.0 oz
receiver weight3.15 kg / 6.9 lb
Environmental Specifications IconEnvironmental Specifications
operating temperature-25°C - 75°C / -13°F - 167°F
enclosure typeNEMA4
enclosure ratingIP66

Related product manuals