Magnetek IMPULSE G+ Series 3 User Manual

January 2011 3 of 9 Impulse•G+/VG+ Series 3
Safe-Off 8001.x
PN: 140-10305
DANGER, WARNING, CAUTION, and NOTE Statements
DANGER, WARNING, CAUTION, and Note statements may be used in this manual to
emphasize important and critical information. You must read these statements to help ensure
safety and to prevent product damage.
DANGER indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury. This signal word is to be limited to the most extreme situations.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, could result in
minor or moderate injury. It may also be used to alert against unsafe practices.
NOTE:
A NOTE statement is used to notify of installation, operation, programming, or maintenance
information that is important, but not hazard-related.
WARNING
Improper programming of a drive can lead to unexpected, undesirable, or unsafe operation or
performance of the drive.
Disclaimer of Warranty
Magnetek, hereafter referred to as Company, assumes no responsibility for improper
programming of a drive by untrained personnel. A drive should only be programmed by a
trained technician who has read and understands the contents of this manual. Improper
programming of a drive can lead to unexpected, undesirable, or unsafe operation or
performance of the drive. This may result in damage to equipment or personal injury. Company
shall not be liable for economic loss, property damage, or other consequential damages or
physical injury sustained by the purchaser or by any third party as a result of such programming.
Company neither assumes nor authorizes any other person to assume for Company any other
liability in connection with the sale or use of this product.

Magnetek IMPULSE G+ Series 3 Specifications

General

Brand	Magnetek
Model	IMPULSE G+ Series 3
Category	Controller
Language	English