Assembly Drawing
WARNING
If cracks or other abnormalities are detected in any part, replace the part
immediately. Failure to do so may cause the crane or hoist to function
improperly.
Replace a split or cracked enclosure, rain-proof button caps, cable armor, cable,
or other parts immediately to prevent water from permeating the pushbutton
enclosure which could cause an electrical shock or cause the crane and hoists to
function improperly.
General Handling
Do not place the pendant in a pool of water, or immerse it in
water.
Do not let the pendant slam into a hard object, wall, etc.
Do not attempt to turn knobs or switches beyond their travel
limits.
CAUTION
Do not operate equipment and/or pendant without switch gasket and label.
Damaged switch gaskets and labels should be replaced to prevent contamination
of the switch contacts. Call Magnetek at 800-288-8178 for replacement gaskets
and labels.
To Next Page
Loading...
