To Next PageTo Next PageWhy won't the spray gun trigger on my Magnum Paint Sprayer?
If you cannot trigger the spray gun on your Magnum Paint Sprayer, the spray gun trigger lock is likely engaged. Rotate the trigger safety lever to unlock it.
Why is paint leaking down the outside of the pump on my Magnum 262800 Paint Sprayer?
If paint is leaking down the outside of the pump on your Magnum Paint Sprayer, the pump packings are likely worn and need to be replaced.
What to do if Magnum 262800 only dribbles paint?
If your Magnum Paint Sprayer pump cycles but the paint only dribbles or spurts when the spray gun is triggered, first, increase the pressure by slowly turning the Pressure Control Knob clockwise. Also, unclog the spray tip.
How to stop Magnum Paint Sprayer from paint running down the wall?
To prevent paint from running down the wall or sagging when using your Magnum Paint Sprayer, move the gun faster. Select a tip with a smaller hole size and a wider fan, and ensure the gun is far enough from the surface.
General| Brand | Magnum |
|---|---|
| Model | 262800 |
| Category | Paint Sprayer |
| Language | English |
Read all warnings and instructions in this manual.
Details on model, series, dispense rate, hose length, gun, and working pressure.
Proper grounding reduces risk of electric shock. Use 3-wire extension cords.
Avoid flammable materials near ignition sources. Ensure proper ventilation and grounding.
Do not aim gun at people or animals. Keep body parts away from discharge.
Avoid misuse that can cause death or serious injury. Follow safety regulations.
Grounding is essential. Connect only to grounded outlets. Use 3-wire extension cords.
Use compatible fluids to prevent chemical reaction and equipment rupture.
Equipment surfaces and fluid can be hot. Avoid touching hot fluid or equipment.
Keep clear of moving parts. Ensure guards are in place.
Toxic fluids/fumes can cause serious injury or death. Read MSDS.
Wear appropriate protective gear like eyewear, hearing protection, and respirators.
Essential grounding and electrical setup guidelines for safety.
Motor has a thermal overload switch. Allow unit to cool if overheated.
Lists and describes sprayer components with reference letters.
Engage trigger lock when not spraying to prevent accidental triggering.
Follow this procedure before cleaning, checking, servicing, or transporting.
Explains settings for Hi Spray, Low Spray, Prime/Clean, and Roll.
Steps for preparing the sprayer for use.
Procedures for priming and flushing the sprayer before first use or new projects.
Instructions for assembling the spray tip and guard onto the gun.
Tips for achieving good spray patterns and preventing tip wear.
How to adjust the pressure control knob for desired spray output.
Practice basic spraying techniques on scrap cardboard.
Procedure to clear a clogged spray tip.
Guidance on selecting the correct tip hole size and fan width for coatings.
Steps for flushing the sprayer after use.
Faster flushing method for water-based coatings.
How to remove and clean the InstaClean fluid filter.
How to clean the gun fluid filter, tip, guard, and exterior.
Instructions for storing the sprayer for short periods.
Procedures for long-term storage, including using Pump Armor.
Steps for preparing the sprayer for storage, including draining and securing.
General advice on keeping the sprayer clean and in good working order.
How to identify and address worn pump packings.
Table of common problems, causes, and solutions for the sprayer.
More problems and solutions, including pump priming issues.
Further troubleshooting for pressure build-up and output issues.
Additional troubleshooting for spray pattern and coverage issues.
Troubleshooting for fan pattern variations, motor issues, and power supply.
Specifications for MAGNUM X5 and X7 sprayers.
Specifications for MAGNUM ProX7 and ProX9 sprayers.
Graco's limited warranty terms and conditions.
Overview of parts availability and repair services.
Important notices and precautions for performing repairs on the sprayer.
Lists available kits for ProX7/ProX9 Series A.
Lists available kits for ProX7/ProX9 Series B, C, D.
Detailed part list and diagrams for X5 Model 262800 (Series A).
Detailed part list for X5 Model 262800 (Series B, C, D).
Detailed part list and diagrams for X7 Model 262805 (Series A).
Detailed part list for X7 Model 262805 (Series B, C).
Part list for ProX7/ProX9 models (Series A, B).
Exploded view and part list for ProX7/ProX9 Series A.
Wiring diagram for specific X5/X7 models.
Wiring diagram for specific X5/X7 models.
Wiring diagram for ProX7/ProX9 models.
Specifications for MAGNUM X5 and X7 models.
Specifications for MAGNUM ProX7 and ProX9 models.
Graco's limited warranty terms and conditions.
