5
Key Features
• Universal design for adaptation of any microscope on Binocular eyepiece or Trinocular port
• Control Communication through USB 2.0 for complete handling through PC. Usable through Laptop as well as desktops
• 1/4” Interline Transfer CCD Sensor provides true color image
• Connectivity through USB 2.0 provides 25 frames/sec.
• Large view area from 240 x 240 up to 720 x 576 pixels (Selectable through software)
• Sensitivity < 1.0 Lux for excellent low light performance
• Signal to noise ratio > 48 dB (AGC off) for high quality image
• Back light compensation for balancing the light on the specimen
• CCD Iris Control and Shutter speeds from 1/50 to 1/100000 for Automatic / Manual adjustment of light intensity
• Auto White Balance and Manual White Balance modes for accommodating different light sources like halogen,
tungsten, etc
• Power supply through USB bus for convenient single cable operation
• The Optics are Anti-Fungus Treated ensures image excellence for long periods in conditions which favor fungus
growth
• Multilayer coatings on Optics through a special lens coating machine to minimize lens surface reflections &
eliminate flare and determine the best combination to achieve higher image contrast & to resulting the minimum
distance at which two minute dots in a specimen can be clearly distinguished
• Manufactured from the Electronic Components Imported from USA
• CE Certifications
• Manufactured by a company having ISO 9001-2008 Certification
MIPS
To Next Page
Loading...