5 - Maintenance
eDynamo| Secure Card Reader Authenticator | Installation and Operation Manual
Page 30 of 34 (D998200110-23)
5 Maintenance
Periodic cleaning of eDynamo’s exterior may be required. To clean the outside of eDynamo, wipe it
down with a soft, damp, lint-free cloth and then wipe it dry.
To avoid damaging the read head, only clean the card path with approved cleaning cards.
DO NOT use liquid cleaning products or insert any other objects into the device.
If the optional docking station’s micro-suction mounting feet lose their holding power over time, use a
clean, damp, lint-free cloth to wipe the mounting feet and the mounting surface clean, then let both
surfaces air dry. This should restore the mounting feet’s holding power.
To Next Page
Loading...
