To Next PageTo Next PageWhat to do if my MAHA Scissor Lifts does not run?
If your MAHA Scissor Lift isn't running, first ensure the main switch is turned on. If the switch is on, check for a power failure. If neither of these resolves the issue, there may be a power cord interruption or defective fuses, in which case you should contact service.
Why my MAHA DUO CM 4.2 U does not raise?
If your MAHA Scissor Lift isn't raising, it could be due to a few reasons. First, check the fluid level and top up the reservoir if it's low. If the fluid level is adequate, the motor rotation may be reversed, the RAISE button might be defective or the pump intake filter may be dirty, and you should contact service.
Why MAHA DUO CM 4.2 U Scissor Lifts does not lower?
If your MAHA Scissor Lift isn't lowering, it could be due to a defective LOWER solenoid valve or a defective LOWER button. If the LOWER solenoid valve is defective, contact service.
What to do if MAHA DUO CM 4.2 U lowers without control button being pressed?
If your MAHA Scissor Lift lowers without the control button being pressed, it could be due to the LOWER solenoid valve being incompletely closed or leakage in the hydraulic system. If that is the case, contact service.
How to fix jerky movements in MAHA Scissor Lifts?
If your MAHA Scissor Lift shows jerky movements, it is probably due to air in the hydraulic system, and you should contact service.
What to do if MAHA DUO CM 4.2 U Scissor Lifts cannot raise rated load?
If your MAHA Scissor Lift cannot raise the rated load, it might be due to a maladjusted pressure valve or a defective pump. If the pressure valve is maladjusted, contact service.
General| Brand | MAHA |
|---|---|
| Model | DUO CM 4.2 U |
| Category | Scissor Lifts |
| Language | English |
Defines the proper and exclusive use of the lift for motor vehicles.
Outlines the necessary qualifications and training for lift operators and service personnel.
Guidelines for the safe installation and initial setup of the lift by authorized personnel.
Key safety rules and precautions to follow during the normal operation of the lift.
Safety measures to be followed during maintenance, repair, and setup work.
Procedures to follow when the lift experiences issues or malfunctions.
Steps to take in case of an accident, including first aid and reporting requirements.
Explanation of the main power switch positions and security features.
Identification and function of all buttons, indicators, and controls on the control panel.
Step-by-step guide on how to safely raise the lift with a vehicle.
Step-by-step guide on how to safely lower the lift with a vehicle.
Crucial warnings and precautions to observe before and during manual lowering.
Detailed step-by-step instructions for safely lowering the lift manually.
Common lift errors, their diagnoses, and recommended remedies.
