MAHA ZS SQUARE II 3.5 - User Manual

52 pages

Save Page as PDF

To Next Page

ZS SQUARE II

Two Post Lifts with Flat Head or Swing Arm Supports

Original Operating Instructions

BA322301-en

ZS SQUARE II 3.5

ZS SQUARE II 4.5

ZS SQUARE II 5.5

ZS SQUARE II 6.5

Main Page

Table of Contents3
General Safety Instructions5
Introduction5
Symbols and Signal Words5
Personal Injury5
Property Damage5
What to Do in the Event of Defects or Malfunctions6
What to Do in the Event of an Accident6
Requirements for the Operating Personnel6
Requirements on Service Personnel6
Intended Use7
Safety Instructions for Handling Hydraulic Fluid7
Description8
Applicable Standards and Directives8
Service Life8
General Machine Description8
Design and Basic Functions8
Control Description9
Safety Devices10
Overall View with Components11
Technical Data14
Danger Zone14
Technical Data15
Set-Up Diagrams16
Transport, Handling and Storage19
Safety Information19
Operation20
Safety Information20
Preparations22
Initial Position/Ready for Operation22
Positioning of the Vehicle22
Positioning of the Supports23
Raising and Lowering Cycles25
Control Elements25
Checking the Support and the Lifting Process27
Lowering Process and CE Stop27
Driving off the Lift and Changeover28
Emergency Lowering29
Electric Emergency Lowering29
Mechanical Emergency Lowering30
Optional Equipment31
Hinged Cover Frame31
Installation Frame for Flat Head Lifts33
Wheel Engaging Support33
Ceiling Light Barrier34
Cable Remote Control35
Troubleshooting35
Safety Information35
LED Signal Codes37
Error Table39
Inspection40
Safety Information40
Daily Inspection before Starting Work41
Cables and Actuators41
Emergency Stop41
Limitation of the Support Arm Pull-Outs41
Limitation of the Support Arm Lock41
Load Supports42
Piston Rod and Toothed Rack42
Pull-Out of the Flat Head Support42
Six-Monthly Inspection43
Oil Level and Hydraulic Oil43
Tightness of the Hydraulic System44
Yearly Inspection44
Welded Joints44
Tightening Torques44
CE Stop44
Hydraulic Hose Line44
Maintenance46
Safety Information46
Lubrication47
Columns of the Lifting Unit47
- Support Arm Pull-Outs47
Support Arm Lock47
Flat Head Support Pull-Outs47
Hydraulic Hose Lines48
Bleeding the Hydraulic System48
Care Instructions50
Repairs50
Decommissioning, Dismantling and Disposal50
Declaration of Conformity50

Need help?

Do you have a question about the MAHA ZS SQUARE II 3.5 and is the answer not in the manual?

MAHA ZS SQUARE II 3.5 Specifications

General

Brand	MAHA
Model	ZS SQUARE II 3.5
Category	Lifting Systems
Language	English

Related product manuals

MAHA ZS SQUARE II Series

MAHA ZS SQUARE II 3.5 - User Manual

Table of Contents

MAHA ZS SQUARE II 3.5 Specifications

Related product manuals