Mahindra 35 Series User Manual

E-20
35 Series 4WD, Model - 3535, 4035, 4535 and 5035 SM June’08
Transmission
RANGE SECTION
A. Removal
1. Drain oil from Speed and Range section.
2. Split the Tractor between Clutch Housing and
Transmission-case as detailed in splitting of
tractor.
3. Remove the tires.
4. Remove Hydraulic Lift Housing and Range Section
top plate.
NOTE: Place the Transmission-case with axle on
suitable stand and suitable support at front
before starting work on Range Section.
5. Remove the rear PTO cover assembly along with
wet clutch assembly and 540 input shaft and gear
assembly.
6. Remove external circlip inside hub and remove
hub.
7. Remove PTO middle support bearing rear circlip.
8. Remove PTO intermediate shaft with ball bearing
from rear side.

Mahindra 35 Series Specifications

General

Cylinders	3
Transmission	8 Forward + 2 Reverse
Fuel Type	Diesel
Brake Type	Oil Immersed
Brakes	Oil Immersed
Steering	Power Steering
Drive Type	2WD
Engine Type	Diesel
Steering Type	Power
Fuel Tank Capacity	45 liters